Translation of compression stroke into Russian
Noun
engine
- During the compression stroke, the piston moves upward.Во время такта сжатия поршень движется вверх.
Examples of compression stroke in a sentence
The compression stroke is crucial for engine efficiency.
Translations of "compression stroke" in Context ordered by category and frequency
Each cylinder has a compression stroke at a different time, so it is important for the individual spark plug wire to be routed to the correct cylinder.
Каждый цилиндр имеет такт сжатия в разное время, поэтому важно, чтобы отдельный провод свечи зажигания передавал напряжение на нужный цилиндр.
During the compression stroke, the electrical contact is kept opened.
Во время такта сжатия электрический контакт остается открытым.
Other translations for compression stroke:
- такте сжатия
compression stroke: Examples and translations in context
With this sensor it can be understood in which of the cylinders is the admission stroke at this moment, where do we need to supply fuel, in which of the cylinders we have the compression stroke and the time of setting fire to the mixture.
При помощи этого датчика можно понять в каком из цилиндров в данный момент такт впуска, куда же нам надо подавать топливо, в каком цилиндре у нас такт сжатия и время поджигать смесь.
To avoid this, petrol engines are fairly low compression ratios (compression stroke when a certain amount of oxygen and gasoline into the combustion chamber).
Чтобы этого не происходило, бензиновые моторы имеют довольно низкие коэффициенты сжатия (такт сжатия, когда определенное количество кислорода и бензина попадают в камеру сгорания).
The natural gas is injected at the end of the compression stroke.
Природный газ подается в конце такта сжатия.
The injection of the fuel at the end of compression stroke continues till the cut-off point.
Впрыск топлива в конце такта сжатия продолжается до точки отсечки.
The multiple injections may be performed during the compression stroke, intake stroke, or any appropriate combination thereof.
Множество событий впрыска может быть осуществлено во время такта сжатия, такте впуска или в любом подходящем их сочетании.
Its timing is such that the fuel is injected only very slightly before top dead centre of that cylinder's compression stroke.
Его выбор времени таким образом, что топливо впрыскивается только очень немного перед верхней мертвой точке такта сжатия, который цилиндра.
Specifically, the reduced pressure level in the fuel line may not be sufficient to force fuel into a cylinder during a compression stroke.
Более конкретно, пониженный уровень давления в топливной магистрали может быть недостаточным для нагнетания топлива в цилиндр в течение такта сжатия.
As an example, during an engine restart, fuel may be injected into a cylinder during a compression stroke.
В качестве примера, во время перезапуска двигателя, топливо может впрыскиваться в цилиндр в течение такта сжатия.